Table of Contents
Advertisement
Eco function
To deactivate: to deactivate the Eco function, again briefly press the E key. The temperature will
return to the most recent setting.
The Eco function will also be deactivated when you use the C key to change the refrigerator
compartment temperature setting, or when you use the D key to activate the intensive freezing function.
Child Lock
High temperature alarm
Switching off the alarm:
•
Acknowledge and turn off the acoustic alarm by pressing any key. Current temperature in the
compartment where the temperature is too high will start to flash on the C1 display unit. If you do
not acknowledge and switch off the acoustic alarm, then it will be activated every hour for
approximately 15 minutes.
Switching on: To activate the Eco function, briefly press the E key. The
symbol E1 will light up. When this function is activated, the appliance
operates under optimum settings.
If the intensive freezing (super freeze) function or the manual freezer
compartment defrosting function are activated, then the Eco function
cannot be activated.
Switching on: To activate the child lock, press the E key and hold it for
a while (3 seconds). CL will briefly appear on the C1 display unit.
The function will lock all keys except the E key.
To deactivate: to deactivate the function, press the E key again.
In case of a power supply failure or outage, the function will be
reactivated.
If the temperature inside the appliance is too high, then an acoustic alarm
will be activated (intermittent tone). HI will flash on the C1 display unit,
and the symbol for the part of the appliance where the temperature is
too high (B1 or B2) will be lit.
•
Every time the appliance is switched on with the A key, there is a
24-hour delay in high temperature alarm operation. If the appliance
does not reach the sufficiently low temperature in this period, the
alarm will be activated.
23
Advertisement
Table of Contents
