Electronic Programme Guide; Timers; 4.10 Digital Text - Mheg; Interactive Television - Philips DTR320 User Manual

Digital terrestrial receiver
Hide thumbs Also See for DTR320:
Table of Contents

Advertisement

NOTICE DTR 320_290405.qxd
4.8

Electronic Programme Guide

You are watching digital TV or listening to a
digital radio programme:
- Press the <GUIDE> button to open the
programme guide.The current programme
list (called "Now/Next") appears.
- Press the
button to consult the current
i
day programme list.
- Press the
or
t
y
channel.
- Press the <OK> button to select the
channel.
4.9

Timers

4.9.1
Setting a timer when watching
digital TV
- Press the <TIMER> button to access the
timer list.
- Then proceed as described in paragraph
5.5.1.
4.9.2
Set a timer from the Guide
- Scroll to the programme for which you want
to set a timer.
- Press the red colour button or the
<TIMER> button to set a timer.The timer
screen is displayed.
- Modify the timer settings as appropriate. For
instance, to set a reminder, select Remind as
Type of timer (default is Record).
- Press the red colour button again to store
the timer and return to the Guide.
16 DAY TO DAY OPERATION
29/04/05
14:07
to move to the wanted
Page 16
4.9.3
Deleting an active timer
A timer is active and you are watching what
you are recording. Recording is signaled by
LED1 lit in red and LED2 lit in green.
- Press key sequence "TIMER, 0" to delete the
active timer.
A timer is active and your receiver is in
standby. Recording is signaled by LED1 lit in
red and LED2 lit in red.
- Press key sequence "TIMER, 0" to delete the
active timer.

4.10 DIGITAL TEXT - MHEG

interactive television

- Depending on the application, press either
the <TEXT> button (White colour button)
or the red colour button to enable digital
teletext. Note that not all channels transmit
interactive television applications at all times.
Note: programmes carrying interactive television are
signalled by the "
icon may be displayed although there is no
MHEG available at the time.

4.11 Using the TV / STB button

To switch your receiver from digital TV or
RADIO to standard analogue channels on your
TV and vice versa, press the <TV/STB> button.

4.12 Watching locked channels

If you have selected a locked channel, you must
unlock this channel to watch it.
When prompted to enter your PIN code:
- Enter your 4-digit PIN code (default is 1234).
" icon in the banner. This

Advertisement

Table of Contents
loading

Table of Contents