Day To Day Operation; (Standby); Selecting Tv/Radio Mode; Changing Channels When Watching Digital Tv Or Listening To Digital Radio - Philips DTR320 User Manual

NOTICE DTR 320_290405.qxd
4

Day to day operation

4.1 Switching your receiver
ON/OFF (standby)
To wake up your receiver from standby mode,
press <P+>, <P->, <BACK>, or any number
button of the remote control. Alternatively,
press the <Standby> button on the front panel
of the receiver.
To put your receiver in standby, press the
remote control standby button. Alternatively,
press the <Standby> button on the front panel
of the receiver.
Note: pressing and holding the <Standby> button
on the front panel of the receiver for more
than 4 seconds will reset your receiver.
Your receiver, as any electronic
equipment, consumes power. In order
to reduce power consumption, please
switch your receiver to standby
whenever you are not using it. If you
are not using your receiver for a long
period of time we recommend you
switch it off by unplugging it from the
mains.This will maximize energy saving
and help protect the environment.
4.2

Selecting TV/Radio mode

To switch your receiver from TV to RADIO mode
and vice versa, press the <TV/RADIO> button.
4.3 Changing channels when
watching digital TV or
listening to digital radio
4.3.1 Using number buttons
- Press the number button(s) to select the
desired channel number.
14 DAY TO DAY OPERATION
29/04/05 14:07 Page 14
4.3.2
- Press <P+>/<P-> to select the next/previous
4.3.3
- Press the <BACK> button to return to the
4.3.4
- Press the <OK>
- Press the
- Press <OK> to exit
4.3.5
- Press the <FAV>
- Press the
- Press the <OK>
Note: empty favourite lists are not displayed.
Using <P+>/<P->
channel in the list.
Using <BACK>
(last channel recall)
previously selected channel.
Using the channel list
button to open the
channel list.
or
t y
button to move to
the desired channel.
the list and view the
selected channel.
Using your favourite lists
button to open the list
of all available channel
lists.
or to
t y
move to the desired
list.
button to make the list
active and tune your
receiver to the channel
that was tuned when
the list was last activated.