Table of Contents
Advertisement
EN
16
General Functions
This section describes the basic functions available while
watching digital TV or listening to digital radio. For
general menu navigation, see Settings.
Receiver wake up
Your receiver is in "low power".The only way to wake it
up is to press
on the front panel.
Your receiver is in standby. Press P+, P-, or any number
key of the remote control. Alternatively, press t or y
on the front panel.
Your receiver, as any electronic equipment,
consumes power. In order to reduce power
consumption, please switch your receiver to
standby whenever you are not using it.
For maximum energy saving we recommend you switch
off the receiver by unplugging it from the mains if you
are not using it for a long time.
Channel selection
Using P+/P- or number keys
To change channels, use P+/P- or the number keys of
the remote control.
Previous channel recall
Press BACK to move to the previous channel you
watched in the current channel list.
Using the channel list
To view the current list of channels while watching
digital TV or listening to digital radio, press OK.
If you press BACK, the channel list disappears.
To select a channel:
- Scroll up or down to the desired channel.
- Press OK.The current programme is displayed in the
background.
- Press OK again to close the list.
Advertisement
Table of Contents
