Product description
Front panel
Q
1 Smart Card slot
. . . . . . . . . . . . . . . . .
2 I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 U
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The front panel
button includes a colour LED indicating the receiver status.
The LED blinks at remote control command reception.
Receiver operating mode
Low Power
Standby
TV/Radio mode
Recording in progress
Recording in progress in standby mode
Download in progress
If the red LED is blinking continuously, it indicates that an upgrade of your terminal
software is taking place. Do not interrupt this operation.Wait for the LED to
light up for two seconds, either in green to indicate successful upgrade, or in red to
indicate a failure, and then continue as normal.
see chapter Inserting your Smart Card
channel -
channel +
remote control receiver window
ON/standby (short press)/Low Power
(3-second press)
LED
red
orange
green
dimmed green
dimmed orange
blinking red
W E R T
EN
9