Related Manuals for Guardian Retractable HLL
Summary of Contents for Guardian Retractable HLL
-
Page 1: Table Of Contents
Product Name: Retractable HLL Part #: 14664 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! EU Declaration of Conformity Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations 4 - 5... -
Page 2: Eu Declaration Of Conformity
New Road, Sheerness, Kent, ME12 1PZ , United Kingdom Declares under its sole responsibility that the range of PPE described hereafter: Retractable HLL Part #: 14664 No other part variants included. is in conformity with the provisions of Regulation (EU) 2016/425 and with the European harmonised standard(s) -
Page 3: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Retractable HLL. This manual must be read and understood in its entirety, and used as part of an employee training program as required local regulations. This and any other included instructions must be made available to the user of the equipment. The user must understand how to safely and effectively use the Retractable HLL, and all fall safety equipment used in combination with the Retractable HLL. -
Page 4: Product Specific Applications
- Structure must be capable of withstanding a minimum load of 20 kN (for one user) or 26 kN (for two users). - Anchorage connectors to which Retractable HLL is attached must be capable of withstanding a minimum load of 19.4 kN. -
Page 5: Limitations
All connections must be selected and deemed compatible with Retractable HLL by a Competent Person. All hooks must be EN 362 approved. See the following for examples of compatible/incompatible connections:... -
Page 6: Components And Specifications
The Retractable HLL is recommended for use with the following products. Please contact Guardian Fall Protection with any questions regarding product compatibility. • Retractable fall arrester compliant with EN 360. • Shock absorbing lanyard compliant with EN 355 (& EN 354 if applicable). -
Page 7: Installation And Use
2. Determine desired location for HTL; ensure location is free of debris, rot, decay, cracking, and hazardous materials. Eliminate or minimize all risk of swing fall. 3. If using SRL to connect to HTL, only the following Guardian SRL part #s are permitted: 34000, 34001, 34002, 34005, 34010, and 34011. -
Page 8: Maintenance, Cleaning, And Storage
Cleaning after use is important for maintaining the safety and longevity of Retractable HLL. Remove all dirt, corrosives, and contaminants from Retractable HLL before and after each use. If a Retractable HLL cannot be cleaned with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean Retractable HLL with corrosive substances. -
Page 9: Inspection Log
Competent Person to inspect and initial. This inspection log must be specific to one Retractable HLL. Separate inspection logs must be used for each Retractable HLL. All inspection records must be made visible and available to all users at all times. -
Page 10: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 11: Labels
Labels... - Page 12 85408 (Rev. A)