Table of Contents
Advertisement
4.4 Connection-By RS-422/RS-232 Protocol
If you want to connect your iCAST MINI and camera by the RS-422 or RS-232
protocol, please refer to the steps below. This chapter will take the RS-422
protocol as an example.
1. Please use an RJ-45 Ethernet cable to connect from the "RS-232/RS-422"
interface which is located on the rear panel of the iCAST MINI to the RS-422
interface which is located on the rear panel of your camera directly.
2. Please tap the camera icon which is located at the top-right corner of iCAST
MINI's "Home" interface to enter the "Connect" interface. After that, please
select the RS-422 option. Finally, please press the "Connect" button to finish
the connection.
24
Advertisement
Table of Contents
