Connection -Bydvip Protocol - Datavideo iCAST MINI Instruction Manual

4.3 Connection-By DVIP Protocol
Before using the iCAST MINI, please connect your iCAST MINI according to the
diagram below.
The DHCP mode is the factory default for Datavideo iCAST MINI and camera
series. After the connection is done, please make sure that your iCAST MINI
and camera are set within the same LAN for controlling your PTZ camera by
the iCAST MINI.
After the connection is done according to the diagram above, the first thing is
to press the power switch on the rear panel of the iCAST MINI to turn on its
power. After that, you can see the initial screen which is shown in the
following diagram. Please connect your iCAST MINI and camera according to
the steps below.
20