How To Display The Test Pattern - JVC CL-S500 Series Installation Manual

How to display the test pattern

To display the Test pattern to check the image quality prior to the use of the monitor,
press the button located in the front of the monitor as follows.
Select test pattern
1) Display the "Operation Button Guide ① " by pressing any one of operation buttons
(A–C) .
2) Press the "MENU" button.
3) Select "TEST PATTERN" from MENU 1/2 using the "▼" or "▲" button and press the
"OK" button. The "TEST PATTERN" OSD appears.
Select the proper test pattern from "SMPTE pattern" or "AAPM TG18-OIQ pattern"
and press the "OK" button.
Default of test pattern depends on the sold market.
Area other than North America
SMPTE pattern
Setting method
You can assign the operation button for displaying the test pattern to the function
buttons (F1 or F2). The following explains how to turn on or off the display to the "F1"
button.
1) Display the "Operation Button Guide ① " by pressing any one of operation buttons
(A–C) .
2) Press the "MENU" button.
3) Select "FUNCTION" from MENU 1/2 using the "▼" or "▲" button and press the "OK"
button. Then select "FUNCTION1" from "FUNCTION" OSD and press the "OK"
button.
4) Select "TEST PATTERN" from "FUNCTION1" OSD and press the "OK" button.
Destination
North America
- 25 -
Test pattern
SMPTE pattern
AAPM TG18-OIQ pattern
AAPM TG18-OIQ pattern