User Commands - ZyXEL Communications 1050 Cli Reference Manual

Chapter 23 User/Group
23.2 User/Group Commands Summary
The following table identify the values required for many
Other input values are discussed with the corresponding commands.
Table 97 username/groupname Command Input Values
LABEL
username
groupname
The following sections list the

23.2.1 User Commands

The first table lists the commands for users.
Table 98 username/groupname Commands Summary: Users
COMMAND
show username [username]
username username nopassword user-type {admin
| guest | limited-admin | user}
username username password password user-type
{admin | guest | limited-admin | user}
username username user-type ext-user
no username username
username rename username username
username username [no] description description Sets the description for the specified user. The
username username [no] logon-lease-time
<0..1440>
username username [no] logon-re-auth-time
<0..1440>
172
DESCRIPTION
The name of the user (account). You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
The name of the user group. You may use 1-31 alphanumeric characters,
underscores( _ ), or dashes (-), but the first character cannot be a number. This
value is case-sensitive. It cannot be the same as the user name.
username/groupname
username/groupname
commands.
DESCRIPTION
Displays information about the specified user or
about all users set up in the ZyWALL.
Creates the specified user (if necessary), disables
the password, and sets the user type for the
specified user.
Creates the specified user (if necessary); enables
and sets the password; and sets the user type for
the specified user.
password: You can use 1-63 printable ASCII
characters, except double quotation marks (") and
question marks (?).
Creates the specified user (if necessary) and sets
the user type to Ext-User.
Deletes the specified user.
Renames the specified user (first username) to
the specified username (second username).
command clears the description.
description: You can use alphanumeric and
()+/:=?!*#@$_%- characters, and it can be up
to 60 characters long.
Sets the lease time for the specified user. Set it to
zero to set unlimited lease time. The
sets the lease time to five minutes (regardless of
the current default setting for new users).
Sets the reauthorization time for the specified user.
Set it to zero to set unlimited reauthorization time.
The no command sets the reauthorization time to
thirty minutes (regardless of the current default
setting for new users).
ZyWALL (ZLD) CLI Reference Guide
commands.
no
no command