Http Redirect - ZyXEL Communications 1050 Cli Reference Manual

C
H A P T E R
This chapter shows you how to configure HTTP redirection on your ZyWALL.
12.1 HTTP Redirect Overview
HTTP redirect forwards the client's HTTP request (except HTTP traffic destined for the
ZyWALL) to a web proxy server.
12.1.1 Web Proxy Server
A proxy server helps client devices make indirect requests to access the Internet or outside
network resources/services. A proxy server can act as a firewall or an ALG (application layer
gateway) between the private network and the Internet or other networks. It also keeps hackers
from knowing internal IP addresses.
12.2 HTTP Redirect Commands
The following table identifies the values required for many of these commands. Other input
values are discussed with the corresponding commands.
Table 46 Input Values for HTTP Redirect Commands
LABEL
description
interface
_name
ZyWALL (ZLD) CLI Reference Guide

HTTP Redirect

DESCRIPTION
The name to identify the rule. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
The name of the interface.
Ethernet interface: gex, x = 1 - N, where N equals the highest numbered
Ethernet interface for your ZyWALL model.
virtual interface on top of Ethernet interface: gex:y, x = 1 - N, y = 1 - 12
VLAN interface: vlanx, x = 0 - 15
virtual interface on top of VLAN interface: vlanx:y, x = 0 - 15, y = 1 - 12
bridge interface: brx, x = 0 - 11
virtual interface on top of bridge interface: brx:y, x = 0 - 11, y = 1 - 12
PPPoE/PPTP interface: pppx, x = 0 - 11
12
87