Troubleshooting; Chapter 8 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications NWA570N User Manual

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• NWA570N Access and Login
• Internet Access
8.1 Power, Hardware Connections, and LEDs
The NWA570N does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the NWA570N.
2 Make sure the power adaptor or cord is connected to the NWA570N and plugged in to an
appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the NWA570N.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the NWA570N.
5 If the problem continues, contact the vendor.
ZyXEL NWA570N User's Guide

Troubleshooting

8
Section 1.5 on page 28.
91