Nwa570N Access And Login - ZyXEL Communications NWA570N User Manual

Chapter 8 Troubleshooting

8.2 NWA570N Access and Login

I forgot the IP address for the NWA570N.
1 The default IP address is 192.168.1.2.
2 If this does not work, you have to reset the device to its factory defaults. See
on page
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
on page
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.2.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide.
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
4 Make sure your computer is in the same subnet as the NWA570N. (If you know that
there are routers between your computer and the NWA570N, skip this step.)
• If there is no DHCP server on your network, make sure your computer's IP address is
in the same subnet as the NWA570N. See
5 Reset the device to its factory defaults, and try to access the NWA570N with the default
IP address. See
6 If the problem continues, contact the network administrator or vendor.
I can see the Login screen, but I cannot log in to the NWA570N.
92
30.
30.
(Section 5.2 on page
I forgot the IP address for the NWA570N.
Appendix B on page
Section 1.8 on page
52), use the new IP address.
119.
Appendix A on page
30.
ZyXEL NWA570N User's Guide
Section 1.8
Section 1.8
103.