Navigation Panel; Table 5 Screens Summary - ZyXEL Communications NWA570N User Manual

Wireless n access point/bridge
Hide thumbs Also See for NWA570N:
Table of Contents

Advertisement

Table 4 Status
LABEL
Firmware
Version
IP Settings
IP Address
Subnet Mask
Gateway IP
Address
Wireless Settings
SSID
Channel
Encryption
Method
MAC Filter
View Statistics
View Association
List

4.1.3 Navigation Panel

After you enter the password, use the links on the navigation panel to go to the various
screens.
The following table describes the sub-menus.

Table 5 Screens Summary

LINK
TAB
Status
System
Wireless Wireless
Settings
Security
MAC Filter
WPS settings
ZyXEL NWA570N User's Guide
DESCRIPTION
This is the firmware version and the date the firmware was created.
This is the Ethernet port IP address.
This is the Ethernet port subnet mask.
This is the IP address of a gateway. Leave this field as 0.0.0.0 if you do not know
it.
This is the descriptive name used to identify the device in a wireless network.
This field displays the radio channel the device is currently using.
This field shows the type of data encryption that is enabled on the wireless
network:
WEP (WEP or 802.1x)
TKIP (WPA or WPA-PSK)
AES (WPA2 or WPA2-PSK)
TKIP + AES (WPA & WPA2 or WPA-PSK & WPA2-PSK)
or
Disable (no security)
This field shows whether MAC filter is enabled or not. With MAC filtering, you can
allow or deny access to the device based on the MAC addresses of the wireless
stations.
Click View Statistics to see performance statistics such as number of packets
sent and number of packets received.
Click View Association List to show the wireless stations that are currently
associated to the device.
FUNCTION
This screen shows the ZyXEL Device's general device, system and
interface status information. Use this screen to access the wizard, and
summary statistics tables.
Use this screen to configure the device name and IP address assignment
settings.
Use this screen to configure the wireless LAN.
Use this screen to configure the wireless LAN's security settings.
Use the MAC filter screen to configure the ZyXEL Device to block or allow
only certain devices to associate with the ZyXEL Device.
This shows the status of Wi-Fi Protected Setup (WPS) on your device.
Chapter 4 Status Screen
47

Advertisement

Table of Contents
loading

Table of Contents