Table of Contents
Advertisement
Figure 79. Installing the SD vFlash media card
1.
SD vFlash media card
Removing the vFlash media unit
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Keep the Phillips #1 screwdriver ready.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
1.
Remove the screw securing the vFlash media unit to the chassis.
2.
Remove the cable from the vFlash media unit and the backplane.
3.
Slide the vFlash media unit toward the front of chassis and lift it out of the system.
2.
SD vFlash media card slot
159
Advertisement
Table of Contents
Troubleshooting
