Regular Inspections - Panasonic DL-EH30SE-W Operation Instructions Manual

Regular Inspections

Inspection of the Leakage Protector...1 Time per Month (by User)
Make sure to perform inspections to prevent any electrical leakage from
resulting in electric shock.
If the inspection is ignored, electric shock may occur in case of any error.
1
Press the Electrical Leakage button with
force for at least 2 seconds.
Check if the Electrical Leakage indicator is on.
2
Unplug the power plug.
Check if the Electrical Leakage indicator is off.
3
Wait 5 seconds before plug the power plug.
The Power indicator on the body will flash for 10 seconds before becoming always on.
When not performing inspections, do not press the Electrical Leakage Test button.
When any error occurs, unplug the power plug immediately and contact your dealer or one of
Panasonic-operated service centers.
Inspection of Piping and Body-related Parts...1 Time per Month (by User)
If the inspection is ignored, a water leak may occur in case of any error.
1
Check if there is any looseness, scratch or damage.
Check if the piping connection is loosened and if
the water inlet hose is scratched or damaged.
2
Check if there is any water leak.
Check if there is any water leak around the
water inlet hose and body.
When any error occurs, unplug the power plug immediately, close the water inlet valve and contact your dealer
or one of Panasonic-operated service centers.
Recommendation of regular check of backflow prevention device
(please request to specialized dealer)
Regarding backflow prevention device, it is recommended to check with the shop or the installation dealer after 5 years
as a guideline.
If it is left as it is, there is a risk that sewage will flow back to the water pipe if there is an abnormality.
22
Power indicator
Occupancy indicator Electrical Leakage Test
button button
Water inlet valve
Water inlet hose
Piping connection
Electrical Leakage
indicator