Table of Contents
Advertisement
Power Saving
Smart Power
Saving
(Seat Temperature)
(Water Temperature)
8-hour Power
Saving
(Seat Temperature)
(Water Temperature)
Tips
When the power plug is unplugged, power outage occurs or the Electrical leakage Test button is pressed, the system
memory of "Smart Power Saving" and the settings of "8-hour Power Saving" will be erased.
(Smart Power Saving / 8-hour Power Saving)
When the body is energized, it will enter the Power Saving mode automatically and
record any usage every hour. If no usage is recorded for any time period for at least 2
days, the seat and water temperature will be decreased automatically.
[The seat temperature can be decreased to 26 ℃ and water temperature to 37 ℃ at
maximum. (The indicator will display when the temperature is decreased → Page 24)]
When used at a later time in the Smart Power Saving mode
It may feel slightly cool at first. After approximately 1 - 2 minutes, the seat will become
warmer, and so will be the water in approximately 3 - 5 minutes.
When being used in such time periods, the seat and water temperature will return to
the one before Power Saving. At this time, the power saving memory will be cancelled
for the time period and refreshed.
When you want to deactivate the Smart Power Saving mode
Method
Press
concurrently for
more than 2 seconds
When you want to resume the Smart Power Saving Mode
Press
concurrently again
for more than 2 seconds
The power supplied to the seat and water heaters will be disconnected to
reduce power consumption. After 8 hours, the power supplied to the seat
and water heaters and previous settings will be restored automatically.
Press
for more than 2 seconds.
· 8-hour Power Saving indicator is on.
· After 8 hours, the seat and water heaters will enter the temperature regulating state.
The 8-hour Power Saving indicator will be off.
When sitting on the seat in the 8-hour Power Saving mode
Seat temperature: start energizing immediately after the seat is occupied. It takes
approximately 10 - 12 minutes to reach the desired temperature.
(Depending on the ambient temperature.)
Water temperature: start energizing immediately after the seat is occupied. It takes
approximately 5 - 7 minutes to reach the desired temperature.
(Depending on the water temperature.)
When the seat is occupied, the Seat Temperature and Water Temperature indicators
will be on again.
When the seat becomes unoccupied after use → Return to the 8-hour Power Saving mode
〈When you want to deactivate the 8-hour Power Saving mode〉
Press
again for more than 2 seconds.
· The 8-hour Power Saving indicator will be off.
Symptom
All flash twice
All flash once
13
Advertisement
Table of Contents
