Ethernet Connection - ZyXEL Communications P-2302HW-P1 Quick Start Manual

Ethernet Connection

A Select Ethernet as your WAN connection type.
B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to C.
Or
Select Use fixed IP address provided by your ISP to give the P-2302HW/HWL-P1 a fixed, unique IP
address. Go to B1.
B1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask
and the neighboring device's IP address given by your ISP.
If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and
just click Next.
C Select Factory Default to use the factory assigned default MAC address. Click Apply to save your changes.
The OTIST in Progress screen appears if you enable OTIST in the previous wizard screen. Wait for the P-
2302HW/HWL-P1 to finish transferring OTIST settings.
D Click Finish to complete the wizard.
P-2302HW/HWL-P1 Series Quick Start Guide
7