Software Installation - Emerson Rosemount 148 Quick Start Manual

April 2024
1

Software installation

Procedure
1. Place the Rosemount 148 PC Programmer CD_ROM into the
drive.
2. Run
3. When first using the software, configure the appropriate COM
ports by selecting Port Settings from the Communicate menu.
4. Install MACTek
bench configuration on the Rosemount 148 system.
Note
The software defaults to the first available COM port.
Quick Start Guide
from Windows
setup.exe
modem drivers completely before beginning
®
Quick Start Guide
XP, 7, 8, or 10.
™
5