Product Specifications - ZyXEL Communications MWR102 User Manual

17 Product Specifications

The following tables summarize the MWR102's hardware and firmware features.
Table 24 Hardware Features
Dimensions (W x D x H)
Weight
Power Specification
Ethernet ports
LEDs
Reset Button
WPS button
Operation Environment
Storage Environment
Table 25 Firmware Features
162 mm x 115 mm x 33 mm
252 g
Input: 100~240 V AC, 50~60 Hz
Output: 5V DC 2A
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
PWR, LAN, WAN, WLAN, WPS
The reset button is built into the bottom panel. Use this button to restore
the MWR102 to its factory default settings. Press for 1 second to restart
the device. Press for 5 seconds to restore to factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 10% ~ 90%
Temperature: -20º C ~ 70º C / -4ºF ~ 158ºF
Humidity: 20% ~ 70%
81