Ap Mode Status Screen - ZyXEL Communications MWR102 User Manual

5.2.3 Configuring your WLAN and Maintenance
Settings
The configuration of wireless and maintenance settings in Access Point mode is the same as for
Router Mode.
• See
Chapter 7 for information on the configuring your wireless network.

5.3 AP Mode Status Screen

Click Management > Status to open the Status screen
Table 3 Status Screen: Router Mode
LABEL
System Information
Uptime
Firmware Version
Firmware Build Time
Operation Mode
Wireless Local Network
Network Band
SSID (Name)
Channel Number
DESCRIPTION
This is the total time the MWR102 has been on.
This is current firmware version.
This is the date/time the current version of the firmware was released.
This is the device mode to which the MWR102 is set – AP Mode.
We provide six modes for your selection: 2.4GHz (B), 2.4 GHz
(G), 2.4 GHz (N), 2.4GHz (B+G), 2.4 GHz (G+N), 2.4 GHz
(B+G+N).
You may select one type of network band from the dropdown menu.
Shows the current name of your wireless network.
This shows the channel number the MWR102 is currently using over Wireless LAN.
24