Security - ZyXEL Communications MWR102 User Manual

Output Power Set the output power of the MWR102 in this field. If there is a high density of APs in
an area, decrease the output power of the MWR102 to reduce interference with
other APs. Select one of the following 100%, 70%, 50%, 35%, or 15%. See the
product specifications for more information on your MWR102's output power.
Apply Click Apply Changes to save your changes back to the MWR102.
Changes
Reset Click Reset to reload the previous configuration for this screen.

7.6 Security

7.6.1 Disabling Security
Select Disable to allow wireless stations to communicate with the access points without any data
encryption.
Note: If you do not enable any wireless security on your MWR102, your network is
accessible to any wireless networking device that is within range.
Figure 15 Wireless > Security
42