System Leds And Diagnostics Display - Lenovo ThinkSystem SD550 V3 User Manual

Table 9. SW5 switch block definition (continued)
Switch
Switch name
number
BMC force update
7
FPGA power permission
8
override
SW13 switch block
Table 10. SW13 switch block definition
Switch
Switch name
number
(Reserved)
1
Debug Atscale
2
RTS (Real time clock)
3
reset
4 FPGA MFG mode
5
Serial select
(Reserved)
6
Bypass PFR
7
BMC Trusted Platform
Module (TPM) physical
8
presence

System LEDs and diagnostics display

The following section provides information on available system LEDs and diagnostics display.
For more information, refer to
Forces XCC boot
Ignores Power Permission and allows
system to power on
(Reserved)
Forces to enable the Atscale feature
Clears CMOS data
Enables FPGA MFG mode
Normal (default)
Sends uEFI debug message to serial
port
(Reserved)
Enables bypass PFR
Asserts TPM physical presence
"Troubleshooting by system LEDs and diagnostics display" on page
Usage description
On
Normal (default)
Normal (default)
Usage description
On
Normal (default)
Normal (default)
Normal (default)
Normal (default)
Sends the XCC to serial port
Normal (default)
Normal (default)
Normal (default)
Chapter 2
Off
Off
251.
.
Hardware components
31