Software Tools; Rohs2 Compliance; Physical Security - Emerson FB2100 Instruction Manual

FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
front cover glass over the Hold to Wake button (the left-most button) for typically from
five to ten seconds.
1.10.

Software Tools

The FBxConnect configuration software provides a series of wizards that allow you to
perform configuration activities for the flow computer. You connect a PC running the
FBxConnect configuration software to the flow computer using one of the communication
ports or through a wireless connection. You can then:





1.11.

RoHS2 Compliance

Device without Integral MVS or SP Sensor:
RoHS (2) EU Directive 2011/65/EU
Device with Integral MVS or SP Sensor:
RoHS (2) EU Directive 2011/65/EU: This product may be considered out-of-scope when
used for the intended design purpose in a Large Scale Fixed Installation (LSFI).
Consult
1.12.

Physical Security

The flow computer enclosure includes provision for you to padlock the door shut. The
fiberglass enclosure supports two padlocks (left in
supports one padlock (right in
10
Set parameters within your application
Configure I/O channels
Specify the serial communication method for a port (RS-232 to RS-485) as needed
View or collect audit trail information such as alarm, event, or historical logs
Update system firmware
https://www.emerson.com/compliance
for up-to-date product information.
Figure
Figure 1-6).
1-6); the aluminum enclosure
Introduction