Bose FreeSpace IZA 2120-HZ Service Manual page 19

FreeSpace
1 2 3
1
POWER switch – ON/OFF AC power.
2
Power LED – Solid blue LED indicates the unit is ON. Blinking blue LED indicates the unit is in standby mode.
3
INPUT SIGNAL LED – LED is green from –37 dBu to 11 dBu, LED goes red over 11 dBu.
4
OUTPUT LIMIT LED – LED is green from –46 dBFS to –2 dBFS, LED goes red over –2 dBFS, approximately
80 W/channel. For each output, 120 watts is 0 dBFS.
1
INPUT – Balanced and unbalanced line-level input connectors.
2
AUTO STANDBY
seconds. The OFF position disables the feature.
3
OUTPUT – The output can be set to STEREO or MONO.
4
MUTE – Contact closure connection that upon trigger (short) will mute all outputs.
5
REMOTE – Input connector for the Bose
6
OUTPUT TRIM – Allows for up to 40 dB attenuation of each loudspeaker output.
7
OUTPUT – Two inverted 2-pin Euroblock connectors for loudspeaker connections. Outputs are not bridgeable.
8
AC Mains receptacle – AC line voltage input.
Product Information
ZA 2120-LZ
®
4
1
® volume control user interface accessory (PC 041966).
2 3 4 5
19
6 7 8