120V power cord* USA/Canada Note: Use only the power cord supplied with your Lifestyle does not fit your power (mains) outlet, DO NOT alter the plug in any way. Contact Bose Customer Service for assistance. Note: The Lifestyle speakers or Bose non-powered accessory speakers ONLY.
Left and right amplifier speaker outputs. A 6-ohm minimum load is required. To determine the correct speaker wire size, see “Wire recommendations” on page 29. ® SA-2 and SA-3 Stereo Amplifier ® dealer or call Bose Customer Service for informa-...
Page 7
Left and right channel line inputs for a local audio device. ® Bose link INPUT/OUTPUT Nine-pin DIN connectors used for connecting the amplifier to a Bose Input signals are passed through to the output jack to allow daisy chaining. ® SA-2 and SA-3 Stereo Amplifier For switches 6 through 9, see “Setting up the amplifier room...
See “Setting Up Additional Rooms For Sound” on page 23. ® Stereo Amplifier ® stereo amplifier and additional remote come ready to be installed and used in a ® stereo amplifier. Model AV-18/38/48...
• DO NOT use the amplifier in a damp location. It is important to prevent moisture from getting into the unit. Setting Up Your Lifestyle ® stereo amplifier ® stereo amplifier does not need to be situated close to either your Lifestyle ® Stereo Amplifier ®...
Mounting methods and hardware ® Stereo Amplifier ® stereo amplifier ® stereo amplifier can be placed on a shelf or mounted on a wall (Figure 3). Connector panel on the left Vertically mounted on wall Wood wall in (2.25 mm)
AC (mains) power outlet. DO NOT plug the amplifier into an outlet until you have completed all other connections. 1. Insert one end of the Bose of the media center (Figure 5). 2. Insert the other end of the Bose panel of the Lifestyle Figure 5 ®...
4. Verify that the setting Normal is selected. If not, select Normal now. 5. Press the Exit button on the remote. ® Stereo Amplifier House code switches ® stereo amplifier to work properly with your home entertainment system, the ® DVD home entertainment system and your TV.
1. Insert the 8-to-9-pin adapter into the SPEAKER ZONES 2 output jack on the rear panel of the media center (Figure 7). 2. Insert one end of the Bose 3. Insert the other end of the Bose panel of the Lifestyle Figure 7 Lifestyle ®...
Stereo Amplifier ® system owner’s guide for more information on operating your House code switches must match main room remote ® stereo amplifier to work properly with a Lifestyle ® DVD system and your TV. Settings ( ) Settings System Setup ®...
1. Insert the 8-to-9-pin adapter into one of the unused ROOM output jacks (B, C, or D) on the rear of the multi-room interface (Figure 10). 2. Insert one end of the Bose 3. Insert the other end of the Bose panel of the Lifestyle Figure 10 ®...
® system owner’s guide for more information on operating your ® music center allows you to control up to four sets of Bose ® music center displays ROOM and HOUSE buttons, Press the ROOM button to control a single room or two or more rooms that share a source.
1. Insert the 8-to-9-in DIN adapter into the SPEAKER ZONES 2 output jack on the rear panel of the music center (Figure 12). 2. Insert one end of the Bose 3. Insert the other end of the Bose panel of the Lifestyle 4. Set the ROOM CODE switches of the Lifestyle (switch 7 up, switches 6, 8 and 9 down).
Page 18
3. Slide switch 5 down (off), and switches 6 and 8 up (on). Note: Refer to your Lifestyle system in more than one room. Figure 13 RC-20 remote Zone 2 switch settings ® Stereo Amplifier ® system owner’s guide for more information on operating your 2 3 4 5 6 7 8...
4. Plug one end of the 20-foot audio cable (supplied) into the free end of the three-foot audio input adapter cable. Plug the other end of the 20-foot audio cable into the Bose link input jack on the rear panel of the Lifestyle...
Page 20
Note: Refer to your Lifestyle system in more than one room. Figure 15 RC-5 remote switch settings ® Stereo Amplifier ® stereo amplifier. ® system owner’s guide for more information on operating your 2 3 4 5 6 7 8...
Connecting speaker cable to SPEAKER OUTPUTS Setting Up Your Lifestyle ® stereo amplifier ® stereo amplifier. Doing so may cause damage to the equipment. ® stereo amplifier requires a 6-ohm minimum load. Positive (+) wire (marked with stripe) Terminal block connector ®...
Amplifier is configured as a supple- mental amplifier, turned on, but plugged into an AC receptacle. Amplifier is on and ready to produce sound. Amplifier is configured as a supple- mental amplifier. Amplifier is receiving data com- ® mands through the Bose link port.
• Single amp 191 speakers RC48 Switch settings: ® Personal • Room code B • Single amp Left Right Surround Surround ® Acoustimass Module Left Center Right ® stereo amplifiers, compati- SA-3 SA-3 SA-2 Media Center Main Bose ® link...
3. This remote is shipped from the factory set for room B. If this remote is used beyond a second room, set switches 6, 7, 8, and 9 to the same room code as set in the Lifestyle stereo amplifier. Note: Refer to your Lifestyle system in more than one room.
Setting up the amplifier room code The room code of the amplifier must match the room code of the remote used in the room where the speakers are installed. Figure 20 Room code switches Amplifier room code settings SA-3 SA-2 Setting Up Additional Rooms For Sound Room A B C 6 7 8 9...
• Now, you can turn them all on and off, change their volumes, or mute them together using a single remote control. ® stereo amplifier are set up using microswitches A, B, Switch Position Function A B C 6 7 8 9...
For additional help, see the troubleshooting information in your system owner’s guide. If the problem still exists, contact your Bose dealer to arrange for service, or contact Bose Customer Service. Refer to the address list enclosed in the prod- uct packaging for correct phone numbers.
Details of the coverage are provided on the product registration card that came with the product. Please fill out the information section of the card and mail it to Bose. Failure to do so will not affect your warranty rights.