Table of Contents
Advertisement
USER'S MANUAL OF WLAN BROADBAND ROUTER
I
Screen snapshot – VPN Setup-Edit-1
Item
Enable Tunnel #
Connection Name
Auth Type
Local Site
Local IP
Address/Network
Local Subnet Mask
Remote Site
Remote Secure
Gateway
Remote IP
Address/Network
Remote Subnet Mask
Local/Peer ID
Local ID Type
Local ID
Remote ID Type
VPN Setup - Edit Tunnel
Description
Click to enable the IPSEC VPN current tunnel.
Assign the connection name tag.
Click to select PSK or RSA.
Click to select Single Address or Subnet Address VPN
connection.
Fill in IP address or subnet address depends on which
Local Site option you choose.
Fill in the local subnet mask.
Click to select Single Address, Subnet Address, Any
Address or NAT-T Any Address VPN remote connection.
Fill in remote gateway IP address
Fill in IP address or subnet address depends on which
Remote Site option you choose.
Fill in remote subnet mask
Define IKE exchange information type
Click to select IP, DNS or E-mail as local exchange type
Fill in local ID except IP selected
Click to select IP, DNS or E-mail as remote exchange
Version: 1.0
40
Advertisement
Table of Contents
