Table of Contents
Advertisement
USER'S MANUAL OF WLAN BROADBAND ROUTER
Bridge
Wireless ISP
Apply Changes
Reset
3.3.4 Wireless - Basic Settings
This page is used to configure the parameters for wireless LAN clients that may
connect to your Broadband Router. Here you may change wireless encryption
settings as well as wireless network parameters.
Screen snapshot – Wireless Basic Settings
Item
Disable Wireless LAN
Interface
Band
interface, Wireless interface, NAT and Firewall modules
are applied to this mode
Each interface (LAN, WAN and Wireless) regards as
bridge. NAT, Firewall and all router's functions are not
supported
Switch Wireless interface to WAN port and all Ethernet
ports in bridge mode. Wireless interface can do all
router's functions
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Description
Click on to disable the wireless LAN data transmission.
Click to select 2.4GHz(B) / 2.4GHz(G) / 2.4GHz(B+G)
Version: 1.0
15
Advertisement
Table of Contents
