USER'S MANUAL OF WLAN BROADBAND ROUTER
Apply Changes
Reset
3.3.11 WAN Interface Setup
This page is used to configure the parameters for wide area network that
connects to the WAN port of your WLAN Broadband Router. Here you may
change the access method to Static IP, DHCP, PPPoE or PPTP by click the
item value of WAN Access Type.
I
Screen snapshot – WAN Interface Setup – Static IP
Item
Static IP
IP Address
Subnet Mask
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Static IP
Description
Click to select Static IP support on WAN interface. There
are IP address, subnet mask and default gateway settings
need to be done.
If you select the Static IP support on WAN interface, fill
in the IP address for it.
If you select the Static IP support on WAN interface, fill
Version: 1.0
27