Table of Contents
Advertisement
Preparation: Connecting to the Broadband Firewall Router
In order to proceed with the advanced configuration of the Broadband Firewall Router, you
need to have completed the Broadband Firewall Router's basic setup detailed in Chapter 3.
1.
Open the web browser in your Windows 95/98/Me or Windows NT/2000/XP
computer.
2.
Type the default IP address (192.168.1.1) in the Location box and press Enter.
3.
It then shows an authentication dialog for the Broadband Firewall Router. Type the
default administration user name, admin, and type the default configuration
password 0000, click the OK button as shown in following figure.
4.
You then enter the Home Page of the device.
5.
The preparation is now completed.
Group Setup
Please follow these steps to set up the Group setup. These groups can be assigned while you
set up the Access Rules of Firewall router. You can refer to the chapter 6 for detail setting of
firewall.
IP Address Group:
1. Click Advanced Settings in the top column. Then click Group Setup.
2. Click IP Address Group, and the following picture will appear.
19
Advertisement
Table of Contents
