Table of Contents
Advertisement
USER'S MANUAL OF WLAN BROADBAND ROUTER
Remote ID
Screen snapshot – VPN Setup-Edit-2
Item
Key Management
Advanced
Connection Type
Connect
Disconnect
ESP
PreShared Key
Remote RSA Key
Status
SPI
Encryption Key
Authentication Key
Apply Change
Reset
Refresh
Back
type
Fill in remote ID except IP selected
Description
Click to select IKE or Manual mode.
Click Advanced button to configure more IKE settings.
Click to select Initiator or Responder mode.
Click to connect manually. [Responder mode only]
Click to disconnect manually. [Responder mode only].
Click to configure 3DES, AES128 or NULL encryption.
Click to configure MD5 or SHA1 authentication.
Fill in the key value. [IKE mode only]
Fill in the remote gateway RSA key. [IKE mode only]
It shows connection status. [IKE mode only]
Fill in Security Parameter Index value. [Manual mode
only]
Fill in encryption key. [Manual mode only]
Fill in authentication key. [Manual mode only]
Click the Apply Changes button to save current tunnel
settings.
Click the Reset button to abort change and recover the
previous configuration setting.
It shows the current connection status. [Manual mode
only]
It returns back to VPN Setup page.
Version: 1.0
41
Advertisement
Table of Contents
