User Interface Communication Fault E:10 - Viking FDWU324 Service Manual

During the normal machine working cycle, if communication between main electronic board and User interface board is lost; this fault is
encountered.
THE FOLLOWING FAULT CODES ARE NOT CURRENTLY APPLICA-
BLE TO VIKING BUILT UNITS, HOWEVER THEY ARE BEING INCLUD-
EVENT THAT FUTURE CHANGES INCORPORATE THE FUNCTIONS
December 12, 2018

User Interface Communication Fault E:10

• Cable harness errors
• Faulty socket installation
• Faulty electronics
• Main electronic board
• User Interface board (U.I.)
ED IN CASE THEY ARE DISPLAYED ERRONEOUSLY OR IN THE
Possible reasons:
THEY APPLY TO.
Troubleshooting
Page 35 of 41