Panasonic Digital Palmcorder PV-DV351 Operating Instructions Manual page 65

Tiirrmfii
Using Tape Image Data
(PHOTOVU LINK/Movie
^Messenger)
By connecting the Palmcorder and PC with
the DV Interface Cable (i LINK), you can
transfer Motion images and still images
saved on the DV Tape directly to your PC
Note
• If PHOTOVU LINK/Movie Messenger
does not work, please refer to note on
page 64
r
Before you begin-
• Insert a recorded Tape (See page 9 )
• Make Palmcorder-PC connections
(See page 64)
• Turn your PC on
• Set Palmcorder POWER to VCR
• Run the Software after the DV
Interface Cable (i LINK) has been
connected to the Palmcorder
n_-_I_/
1 Repeat steps 1~4 on page 59
to
run the PHOTOVU LINK/Movie
Messenger
Note
3still
CAPTURE
3movie
CAPTURE
PLAY Button
2
• When the DV Interface Cable (i LINK)
is connected, the input display will
automatically become DV If it is not
DV, please confirm the connection
Then, close and restart the software
Click ► (PLAY) button on PC screen
to playback the DV tape
• Please use the LCD monitor on the
Palmcorder or PC screen for
confirmation
| To capture Motion images
3
Click on [MOVIE CAPTURE]
at the
point you wish to capture a Motion
image Click on [STOP] to end capture
• The image is transferred to the PC in
real time
• The maximum capture time is approx
3 minutes
• When capturing data containing
changes between 12 bit and 16 bit
and/or between SP and LP mode, a
separate file will be made for each
mode
• Please refer to pages 61-63 for other
functions
| To capture Still images
3
Click on [STfLL CAPTURE]
at the point
you wish to capture an image
• Repeat step 3 to continue capturinq
images
• Captured Still images are saved to the
PC, and you can playback the saved
images on the Image Browser