Picture In Picture (Pinp) - Panasonic Digital Palmcorder PV-DV351 Operating Instructions Manual

Picture inPicW(PiHP)1
You can display a PinP (still image) screen
on the Main Picture.
PinP position is fixed at the bottom right
of the screen.
Main Picture
Picture in Picture
(PinP still image)
PHOTOSHOT
Button
Before you begin-
• Connect the Palmcorder to a power
source. (See pages 11, 12.)
3, 4jog KEY
2menu
Button
1
2
3
Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
Press MENU to display the menu
screen.
Rotate JOG KEY repeatedly to select
ip^tFfiJLojtiUojjgl, then press JOG KEY to
display the CAMERA FUNCTION menu
screen.
1 POWER
Switch
Press JOG KEY to selectlEWl
• Press MENU twice to exit this menu.
• "PinP" will appear in the EVF or the
LCD monitor.
7REC/PAUSE
Button
5,6,7
CAMERA STILL Button
5
6
Aim at the scene you wish to place as
PinP, then press II (CAMERA STILL)
to freeze the image.
Press II (CAMERA STILL) again to
place the frozen image as PinP.
Press REC/PAUSE to record a scene
with PinP image.
• Press PHOTOSHOT to record a
scene with PinP image in PhotoShot
mode.
• Press II (CAMERA STILL) again to
remove PinP image.
46
For assistance, please call: 1-800-211-PANA(7262) or
send e -mail to: consumerproducts@panasonic.com