Panasonic Digital Palmcorder PV-DV351 Operating Instructions Manual page 23

' Using the LCD Monitor
The LCD (Liquid Crystal Display) monitor
can be used while recording
A
Press MENU
to display the main menu
screen
B
Rotate JOG KEY
to select E32IS1]
from the mam menu screen
(See pages 16, 18 )
C
Press JOG KEY
to display the LCD/
EVF SETTING screen
D
Press JOG KEY
to select
LCD BRIGHTNESS or LCD COLOR,
then
rotate JOG KEY
to adjust
E
Press MENU
twice to exit this mode
Before you begin-
• Connect the Palmcorder to a power
source (See pages 11, 12)
• Insert a cassette with record tab closed
(See page 6 )_
1 Press LCD-OPEN
to unlock the LCD
monitor
2
Swing the LCD monitor fully open
and adjust the viewing angle
• The LCD monitor will automatically
turn on
• When the LCD monitor is completely
closed, it will shut off automatically to
save power
• Adjust the LCD Brightness and/or
color of the LCD monitor if necessary
Please refer to 'To adjust the LCD
BRIGHTNESS or COLOR" to the left
3 Start recording
(See page 22 )
• Using the LCD monitor will reduce battery
operating time
• Close the LCD monitor completely when
not in use
CO
0)
(C0
<n
<Q
1
0)
<o
Rotate the LCD monitor 180 degrees
so it
faces the same direction as the lens to
record yourself (CAMERA mode)
The picture in the LCD monitor will appear
reversed
MIRROR (see page 15)
in the Camera mode menu screen to see
the picture as it is actually being recorded
23