Table of Contents
Advertisement
DC Cable
(Supplied)
Source (Recording)
Palmcorder
^—S-VIDEO IN
—A/V IN
AA/ Cable
(Supplied)
-S-Video
Cable (not
supplied)
To Audio Out
TV
(To View)
—VHF Connecting
Cable (not
supplied)
Audio Out Video Out
Source
VCR (Rear)
' S-Video Out
To Video Out
To S-Video Out
(If there is S-Video Out)
OSD functions are not displayed on the
TV monitor.
Do not connect AA/ with S-Video on a
different unit. The picture and sound may
be abnormal.
If both S-Video Cable and A/V Cable are
used, the picture will come from the
S-Video Cable.
Do not connect the A/V Cable and
S-Video Cable to other devices.
If a recording is made at the VCR while
the counter is displayed, it cannot be
reset.
Depending on the input signal, the closed
caption signal may not be able to be
recorded normally.
Before you begin-
• Connect both Palmcorder and VCR to
their power sources.
• Connect the Palmcorder to a VCR as
illustrated left.
• Turn ON both units.
• Before using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal. (See page 12.)
Insert a pre-recorded tape
into the source (playing) VCR and a
blank tape with recorded tab closed in
place into Palmcorder.
i
Press MENU
to display VCR MENU
screen.
t
1 Rotate JOG KEY
to select
ET551
then
press JOG KEY
to
display the VCR REC MODE menu
screen.
1 Rotate JOG KEY
to select ECBZS3SL
then
press JOG KEY
to set to IN.
• "LINE-IN" is displayed on the EVF and
LCD monitor. (See page 20.)
( Press PLAY
on the VCR. When
the tape reaches the point you want to
start dubbing,
press PAUSE.
1 Hold down • (REC) and ► (PLAY)
and then pause the Palmcorder.
»
Simultaneously, press 11 (PAUSE)
on
both units to begin copying.
I
1 Press ■ (STOP) on both units
when
copying is completed.
— CAUTION:-
Unauthorized exchanging
and/or
copying of
copyrighted recordings may be copyright
infringement.
53
Advertisement
Table of Contents
