Panasonic Digital Palmcorder PV-DV351 Operating Instructions Manual page 33

You can record still images from a
cassette tape to a Memory Card
Warning
• Memory Card will not work when DV
interface Cable (i LINK) is connected
MENU
Button
4photoshot
2pOWER
Switch
3PAUSE
Button
You can view the images on the Memory
Card
Before you begin--
• Connect the Palmcorder to a power
source (See pages 11, 12 )
• Set POWER to OFF before inserting a
Memory Card (See page 10 )
1
2
3
4
Repeat steps 1 and 2 on page 32
Set POWER to VCR
• The POWER lamp lights red
• Be sure POWER is fully turned to
VCR position
Press ► (PLAY) to start playback of
the cassette tape And then, press II
(PAUSE) to select an image
Press PHOTOSHOT to record the
desired image to the Memory Card
JAM > tt»l
•• P mOto^
099
HHI
co**L«xeo
13(94
1 9«*1 I
_/
• When PHOTOSHOT is pressed in
PLAY or SLOW mode, the screen
goes to STOP mode
• To playback the images of the
Memory Card, see pages 33-34
• When Variable Speed Search is
done (see page 29), this feature can
_ not be used
3 Repeat steps 3-4 to record another
image to the Memory Card
Before you begin-
• Connect the Palmcorder to a power
source (See pages 11, 12 )
• Set POWER to OFF before inserting a
recorded Memory Card
(See pages 32, 33 )
1
Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD
• The POWER lamp lights red
• Be sure POWER is fully turned to
M-CARD position
• "PLAY PUSH PLAY KEY" is
displayed for 10 seconds_
(Continued on next page )
33
1 POWER Switch