2. Remove your finger from the shutter release button.
Push the yellow flash pop-up switch [V] to expose
the RTF above the pentaprism.
^
The RTF starts charging automatically. When charging
is completed, the flash mark [
] comes on in the
LCD panel and also the flash mark in the viewfinder
[ $ ] lights up when the shutter release button is
pressed lightly. (The flash recycle time is approxi¬
mately 4 seconds.)
3. Press the shutter release button all the way down to
take a picture.
Note:
• When shooting Is finished, be sure to put the RTF back
into the original storage position.
• While the RTF is in the pop-up position, a small amount
of electric current is constantly supplied to recharge it. So,
when not in use, be sure to keep it in the storage position
to save the battery.