Table of Contents
Advertisement
2
2. Turn the select dial O in either direction while
pressing down the mode button Q until the mark
[PROG] appears in the LCD panel.
t
If the select dial is held down, the mode can be
changed more rapidly.
3
3.
Lightly press the shutter release button while looking
into the viewfinder to confirm the mark [P] and
the shutter speed appearing in the viewfinder display.
3k
If a green shutter speed indication between 2000
and 60 (1/2000 sec. to 1 /60 sec.) comes on, you can
start shooting. When ''30'' or "LT" glows or flickers
in the viewfinder, the selected shutter speed is slow
enough to cause camera shake. The use of a flash or
a tripod is recommended,
3k
When the mark [ $ ] blinks, use the built-in RTF
(see page 24).
Advertisement
Table of Contents
