Pentax SF10 Manual page 13

4
4. While holding the cartridge with your left hand, pull
the film leader out.
5, Position the film leader end at the film loading mark
O« as illustrated.
Make sure the film perforations engage the sprocket
teeth © properly. Also make sure the film is placed
properly between the film guide rails © .
Note:
• The shutter curtains are made of a thin, delicate material
to maintain extreme precision. Be careful not to touch
them with your hand or the film end during film loading.
• The DX-information pins are contacts to read the film's
ISO speed, so keep them free of dirt, dust and scratches.
9
^