Table of Contents
Advertisement
4. Troubleshooting
1.
TV in Standby
Standby LED Indicator
9
NOTE
•
Status can be changed in user menu and may default off.
2.
If
Not Lit: (and should have been lit with status setting)
AC 120Vac Line
9
3.
If missing:
120Vac Source and Power Cord
9
4.
If OK: Remove
One Connect
If TV Powers on and Disconnect Banner appears.
9
5.
If TV powers On:
One Connect and cable status.
9
6.
If TV does not power on :
Resistance on SMPS
9
7.
If fuse is open replace SMPS.
6. If fuse is OK:
Standby
: A13V (Always On) supplies to Main Board.
9
7. If any missing remove the SMPS connector to Main Board. (Activates Back Light & SMPS Test)
Standby A13V again
9
•
If OK replace
•
If still missing replace
4-4
Cable.
FUSE after first removing AC power cord.
Main Board.
SMPS.
Advertisement
Table of Contents
