Description & Screws
12
Remove the DC VSS-PD BOARD.
•
Gently Lift Bottom Right corner to release
lock.
•
Use both hands to hold the 'SMPS' and slide
the board to the LEFT to release the board.
NOTE
When installing the DC VSS-PD BOARD, verify
the board is properly positioned in all
4 mounting slots.
CAUTION
The SMPS will hold electrical charge. Handle
from the edges.
Locking
•
43"
•
49"
Fixing Hole
Locking
3. Disassembly and Reassemble
Picture Description
Bottom chassis Guide Fixing Hole
Slide to the left to release the board
Bottom chassis Guide Fixing Hole
Slide to the left to release the board
Locking
Locking
Locking
3-5