Hae69C Mount Operation Via Ioptron Commander; Download And Install Ascom Platform And Commander - iOptron HAE69C Instruction Manual

5. HAE69C Mount Operation via iOptron Commander

An HAE69C mount can also be operated by connecting to a Windows PC via ASCOM, a MacOS or
Linux computer via INDI driver, or a single board computer like Pi. Connect the mount to a computer via the
USB-C port on the mount base. Install drivers and software and you are ready to go. No handset is needed.

5.1. Download and Install ASCOM Platform and Commander

Here is an example on how to connect an HAE69C to a Windows PC using iOptron
Commander/ASCOM driver. The software/firmware needed:

Windows 7 /8.1 /10/11 64bit system with .NET Framework 4.8 installed. For Win10 and 11, make
sure that .NET Framework 3.5 is activated.

ASCOM Platform 6.6 or late version. Download and install it from http://www.ascom-standards.org;

iOptron Commander and ASCOM Driver Installer 9.1 or later. Download and install it from the device
product page.
After installation, you should see an iOptron Commander icon like this on your computer desktop.
28