Epson dreamio EMP-DM1 User Manual page 15

Rear
A
B
C
D
E
F
Name
A
Computer input port
B
Component input port
C
Video input port
D
Audio input port
E
Power inlet port
F
Digital Coaxial Audio-Out
port
G
USB port
H
Security slot (j)
I
Remote control light-
receiving area
J
Speakers
K
Air exhaust vent
L
Storage feet
Can be connected to the RGB output port of a computer.
Can be connected to the component (YCbCr or YPbPr) output port of a video device.
Can be connected to the ordinary image output port of a video device.
Can be connected to the audio output port of the connected video device or a computer.
s
p. 43, 44
Connect the power cable. 18
Can be connected to an audio device with a digital coaxial audio input port.
Connects a USB 1.1-based USB memory or a multicard reader to play the MP3/WMA, JPEG,
®
DivX and other format storages.
Supports Kensington's micro saver security system. For details, access the Kensington website at
http://www.kensington.com/.
Receives signals from the remote control.
Placed on the left and right; supports the virtual surround sound system.
The air outlet of the unit after cooling.
Caution
Do not block the exhaust vents, and do not touch the exhaust vent immediately after projecting, or
while projecting, since it becomes hot.
Used when placing the unit in an upright position. When storing the unit in an upright position,
place it on a stable surface with the storage feet at the bottom. Be sure to place the unit in the
storage case supplied with the unit so that no dust enters the air intake vent.
Function
s
p. 44
s
p. 42
s
p. 16
L
K
J
I
H
G
s
p. 44
s
p. 43
s
p. 48
s
p. 48
13