Table of Contents
Advertisement
Info page
Item
Information
Lamp Hours: Total usage time of the lamp. 0H is displayed for 0 to 10 hours. Changes to units of
Displays the
current status.
Source:
Video Signal:This is displayed when "Video" is selected as the "Source", and displays the format
Resolution: The resolution is displayed if the "Source" is other than "Video". The resolution of
Status:
Reset Lamp
After you have replaced the unit lamp, initialize the lamp hour settings. The accumulated lamp
Hours
operating time is cleared.
1 hour at 10 hours and above. The display turns yellow text when it is time to
change the lamp.
Displays whether standard DVD player images are being projected, or images from
external video equipment or a computer are being projected.
of the video signal being input.
image signals from a computer and the component video signals that are being input
are displayed.
Displays any error information. You may be asked for this information when you
contact your service center.
Contents
57
Advertisement
Table of Contents
