Routing; Static - Airlink101 AR410W User Manual

4.4 Routing

This section enables you to set how the router forwards data: Static and Dynamic.
Routing Table enables you to view the information about the network topology created
by the router.

4.4.1 Static

This page enables you to set parameters by which the router forwards data to its
destination if your network has a static IP address.
Network Address: Type the static IP address your network uses to access the Internet.
Your ISP or network administrator provides you with this information.
Network Mask: Type the network (subnet) mask for your network. If you do not type a
value here, the network mask defaults to 255.255.255.255. Your ISP or network
administrator provides you with this information.
Gateway Address: Type the gateway address for your network. Your ISP or network
administrator provides you with this information.
Interface: Select which interface, WAN or LAN, you will use to connect to the Internet.
Metric: Select which metric you want to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom of the
page.
Update: Select one of the entries in the static IP address table at the bottom of the
page and, after changing parameters, click Update to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the page
and click Delete to remove the entry.
30