Authentication - Airlink101 AR410W User Manual

Compression, and Dynamic Turbo. This setting is backwards compatible with non-
Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all devices on
the wireless network are configured with Super G with Dynamic Turbo enabled.
Super G with Static Turbo: Capable of Packet Bursting, Fast Frames, Compression,
and Static Turbo. This setting is not backwards compatible with non-Turbo (legacy)
devices. Static turbo mode is always on and is only enabled when all the devices on the
wireless network are configured with Super G with Static Turbo enabled.
SSID broadcast: select to enable or disable the broadcast of the router's SSID.

4.2.2 Authentication

This screen enables you to set authentication type for secure wireless communications.
Open System allows public access to the router via wireless communications.
Shared Key requires the user to set a WEP key to exchange data with other wireless
clients that have the same WEP key. This router also supports WPA-PSK encryption.
Authentication Type: The default setting for authentication is set to Open System.
There are five options: Open System, Shared Key, WPA, and WPA-PSK.
Note: If you don't have a RADIUS server in your network and you want to use
WPA encryption, select WPA-PSK as the Authentication Type.
WEP: Enabled or Disabled. This is to enable or disable WEP encryption.
Mode: Select the key mode in ASCII (any letter or number) or HEX (letters A-F and
numbers 0-9).
23