Table of Contents
Advertisement
Static DHCP
Domain Name
Click <Apply Changes> at the bottom of the screen to save the above configurations.
3.1.3 Routing
You can turn off the NAT function of your router by enabling the Static Routing and let the router
forward packets by your routing policy.
Parameter
Enable Static Routing
Destination LAN IP
Subnet Mask
Default Gateway
Static Routes
Delete Selected
Specify the Static DHCP Addresses for your
LAN clients.
Enter the domain name of your LAN interface if
there is one.
Description
Enable/disable the NAT function
Enter the IP Address of the destination LAN.
Enter the Subnet Mask of the destination LAN.
This is the gateway IP Address where packets are sent.
Input the gateway IP Address.
From the table, you can check each Static Routing
setting.
If you want to delete a setting, check the 'select' box of
the setting you want to delete, then click 'Delete
42
Hide quick links:
Advertisement
Table of Contents
