Table of Contents
Advertisement
Setting the Liftgate Open Height
1. Open the liftgate.
2. Stop the liftgate movement by pressing the
control button on the liftgate when it reaches your
desired height. When the liftgate stops moving,
you can also move it manually to the height
you desire.
3. Press and hold the control button on the liftgate
until you hear a tone, indicating that your
programming of the liftgate height is successful.
The next time you use the power feature to open the
liftgate, it opens to its newly programmed height.
To change the programmed height, repeat the
process above.
*if equipped
Wireless Accessory Charger*
This feature supports Qi wireless charging
compatible devices. The charging area is on the
center console or in the media bin below the
instrument panel. You can only charge one device
at a time on the charging area. You can charge a
device if the vehicle is on, in accessory mode or if
SYNC 3 is on. To begin charging your device, place
the device on the center of the charging surface
with the charging side down. The charging stops
after your device reaches a full charge. For more
information, see the Wireless Accessory Charger
chapter of your Owner's Manual.
2 0 2 4 A V I A T O R
Trailer Tow*
Before you tow, refer to your Owner's Manual
for complete information on weight, details and
limitations, as well as safety information and the
proper equipment to use while towing.
Auto Air Refresh*
Auto Air Refresh uses an outside gases sensor to
automatically adjust the climate control system to
change from outside air to recirculated air to help
reduce the entry of outside odors into the cabin.
It uses a particulate matter sensor in the cabin to
estimate and provide information about particulate
matter pollution in the cabin. The system can
automatically refresh the cabin air with outside air or
you can manually refresh the interior air through the
touchscreen. See the Interior Air Quality chapter of
your Owner's Manual.
17
Advertisement
Table of Contents
