Table of Contents
Advertisement
FUNCTION
Network
settings
Reset All
Settings
Current
System
Status
The Information menu shows you the current operating status of the
projector.
64
Operation
DESCRIPTION
Wired LAN
AMX Device Discovery
When AMX Device Discovery is On, the projector
can be detected by AMX controller.
MAC Address
Displays the mac address for this projector.
Returns all settings to the factory preset values.
The following settings will still remain: Position,
Phase, H. Size, Projector Installation,
Language, High Altitude Mode, Security
Settings, Baud Rate.
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the Picture menu.
Resolution
Shows the native resolution of the input signal.
Lamp Mode
Shows the current lamp mode.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM, YUV or
RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Displays the firmware version of the projector.
Advertisement
Table of Contents
